In Ground Liners from A-Pro Services
Replacing the liner on an
in ground, -or inground- pool is a big investment, and needs to be done
properly. In ground pool liners should be carefully measured to fit
the pool perfectly, without wrinkles or hollow areas. A properly
fitted liner will have no wrinkles, and should fit tightly at the corners.
Obviously, a carelessly measured liner results in a poor fit, and will
result in premature liner failure, so it is wise to have an expert measure
and install your liner.
At A-Pro Services, when
we measure and install your inground liner, we guarantee it to fit. We
measure for the liner very accurately, and use a liner vacuum specifically
designed for installation of in ground liners. We vacuum the liner
into place, and the perfect fit is verified before we add a single drop of
water. Only then do we proceed to install the liner. This also
helps us to make sure that the liner is installed evenly, with approximately
equal amounts of stretch throughout the liner. The result is that the
liner lasts longer, looks better, and is less likely to be damaged.
Wrinkles in the liner
are not just ugly, they are a nuisance! They collect dirt and algae,
and increase the chances of damage due to cuts from the vacuum head, or
sticks when using the net, and some automatic vacuums will get stuck on
Hollow places behind the liner, like at
the corners, put undue stress on the liner, and also increase the chances of
puncture or cuts. Hail can ruin a liner, especially above the
waterline in corners and radiuses, if they are not properly fitted. In
these areas, the liner is stretched very tight, is more horizontal, and has
no backing. Hail can go right through the liner! Hail, of course,
often comes with rain. If a hole is punctured at the water line, and
then the pool water level rises, the liner can float, and sometimes rip, and
usually the liner develops those pesky wrinkles discussed earlier.
A properly fitted liner
can mean the difference between whether the liner lasts 3, 5, 10, or even 20
years. With the average cost of liner replacement being $2500 to
$3000, a poor fit can cost a lot of money!
That is why, at A-Pro Services, we include
measurement at no extra charge when you purchase your liner from us.
We'll give you a perfect, every time, so you can spend your money on other
things....Like Having FUN!!
"When You Want It Done Right....Call
Your Pool and Spa Service Company
Oklahoma City, Oklahoma
For more information, and to view liner
patterns, or to learn more about A-Pro Services, please visit our main site,
or for more LINER information,
Liners: PoolLinerOKC.com ]
For Pool, Spa and Hot tub repairs and service in
Central Oklahoma, including Oklahoma City, Bethany, Warr Acres, Edmond,
Yukon, Mustang, Moore, Norman, El Reno, Midwest City, and Del City, Please
call us or e-mail your inquiries using the link below. We offer repairs and
service for all major brand pools, spas, hot tubs, and their equipment -
Pumps, filters, heaters, controls, spa packs, and diagnostics. We
have been repairing pools, spas, and hot tubs in Oklahoma for more than 25
years, and have experienced pool, spa and hot tub technicians on staff who
are ready to assist you with all your pool and spa repair needs. We
are EXPERTS in in ground vinyl liner replacement.
zip codes we service in Oklahoma include:
73003, 73008, 73013,73034, 73083, 73036, 73059, 73064, 73090,73099, 73064,
73101, 73102, 73103, 73104, 73105, 73106, 73107, 73108, 73109, 73110, 73111.
73112, 73113, 73114, 73115, 73116, 73117, 73118, 73119, 73120, 73121, 73122,
73123, 73124, 73125, 73126, 73127, 73128, 73129, 73130, 73131, 73132, 73134,
73135, 73136, 73137, 73139, 73140, 73141, 73142, 73143, 73144, 73145, 73146,
73147, 73148, 73149, 73150, 73151, 73152, 73153, 73154, 73155, 73156, 73157,
73159, 73160, 73162, 73163, 73164, 73165, 73167, 73169, 73170, 73172, 73173,
73178, 73179, 73184, 73185, 73189, 73190, 73194, 73195, 73196, 73197, 73198,